Concave on the back side.
I don't know, but there are three small holes in it, which I assume you can mount bolts/screws into and pull it off. I also have pulley and gear...
You already have the glasspack, put it on, but use a clamp and not a welder. If you don't like it, take it off! Can't go wrong that way! Only...
Wouldn't drone if I had glasspacks! :rl: I did get rid of most of that noise, but it took a lot of work.
Yeah, this one has no lip. It is from March, for what it is worth. I have it mounted but don't have the correct belt yet, and if I take the old...
For once, I will disagree with Craig... :sorry: I have used glasspacks on 4-cyl suzuki samurai, 4-cyl chevy luv, 6-cyl 280ZX, and on my maverick...
That helps! So I made my own with what I have in the garage. All thread carriage bolt, two washers, and a nut. Don't even need a vise!
Well, next issue...Got transmission hooked back up and driveshaft, pulled air conditioner off, and installed just the intermediate powersteering...
I am sure if I just pound it on, I will mess something up...
Yes, I realize he revived an old thread, but this is still good information. dmboshkov, I am using Wilwood 260-8555-P The P just means it is...
OK, got the round bracket today, pump fits in it, but it doesn't quite fit the other brackets. I can make it, and will have to, I guess. It...
Those are American Racing Torque Thrusts, 17X8 with 4" backspacing. Tires were pretty low profile. I typically run Cragars 15X8 rear and 15X7...
It looks like the only difference it that one extra hole. By only using the top hole, you don't have that extra material hanging down below, so it...
Even if they are not in the best shape, shoot us a picture of them. I am in the market for seats, and will look for them if I like the style.
For what it is worth, the guy that dyno'd and helped me tune my mav has made several of the fastest mustangs. He was the first to get into 9...
Sorry to offend, but my first gut feeling is "some guy" rebuilt the carb before you got it. That is almost always a bad thing.
Welcome to the board! I would start at 1) who rebuilt the carb? Might be better off with a new one. That thing was 40 years old before it was...
I used the Rod and Custom non-coilover. 71 gold used the coilover. RC106 is mine, RC107 is coilover version. Be prepared, it is a lot of work,...
Don't know. Maybe. Or maybe they would just get closer to the head, then become obstructed on something else. Every time I go one step forward,...
It would be more expensive because I have already spent $300 on this... [IMG] So that oilpan would end up costing me $350 before I get it put on.
Separate names with a comma.
