Got some brake lines installed but ran out of the compression fittings, I need two more, so I will buy them tomorrow and have all the brakes fixed...
Thanks for all the pictures!!!
Thanks, man!!! Getting the kit welded in, and engine and trans back in is only half the battle. Still need to replumb the brakes, fuel, and...
That is a Rod and Custom RC-107 kit. Swaps out all the old suspension parts, shock towers, everything, for a coilover rack and pinion Mustang II...
Take a lot of pictures.
Says a check is in the mail, so consider it sold.
Moved the power steering up to the top where the A/C compressor used to be. Couldn't get the belt to route correctly without either using the A/C...
Got it today, still have the wrong belt. But, only an inch or so longer than the original belt, so I will take that in as well as the piece of...
It is pretty cool, so if nobody wants it, I wouldn't mind keeping it. Doors and hood open (only has a 250 in it) and you can turn the wheels and...
Thanks for helping me out here, Dave...:p Especially now that I have already bought for the guy and drove to the post office for his shipping...
OK, I have a prospective buyer, so I will pick it up tomorrow morning if it is still there.
Here in the US, we just swap them at the local parts shops. Autozone, O'Reilly, NAPA. If you cannot get them there, maybe you could work out a...
I am keeping the 80-3/8" belt, just in case it fits after the A/C delete kit comes in tomorrow. No smog pump. With just a little bit of luck, it...
I like the solid rods to keep it from just being a big round blob hanging there.
It is at a gas station down the street from me. He only has one, so if you want it, let me know, and I will pick it up and help get it to you....
Pretty good song, too. I like their style.
OK, moves power steering pump up to air conditioning location... Says "Uses stock serpentine belt: No" So I will be back in the market for...
I have been running the A/C compressor just because there was nothing on that side of the engine and I needed it to create the angles needed to...
Well...just one more little stupid road-block... Finally found a belt that just BARELY would slip over the pulleys, and fairly tightly, at that....
Those pics have some from 2012, because I am in there. Some are the Carrolton meet this year, and some are last year's Katy meet.
Separate names with a comma.
