Nobody else knows, either? :huh:
That picture above is stock suspension, aligned to specs. Smaller tires. The pics in first post are current tire and no alignment done. The top...
When it is up on the rack, how does the laser/computer combination measure caster?
I didn't use those holes, because mine were not even. I got measurements from 71gold from front and back of his frame rails, and then compared...
25.5 and 12"
[IMG] This is completely stock front suspension, with 205/60r15 tires. I was able to get 225/60 on there when it was dropped down, so the fender...
I didn't get it from them. I could probably call and get them. And ask about the paint. Never thought about it. I figured it was a basic...
No way. First off, the crossmember fits TIGHT between the frame rails. So if it was not even, it would be 1/8-1/4 inch MAX. There is no way short...
I have a rub on the left front tire. I am sure it was not rubbing when I first drove it, after I eyeball aligned it. But now it is rubbing and I...
Get it on the road in time for the next meet here in Texas!!! I plan on finally getting mine to one.
Took a closer look today, and my caster is so far forward that it is pushing that left tire into the fender. Easy fix. Bought the 2" drop...
I gave my P heads away after i swapped to non-P heads. They were THAT frustrating.
I have some experience with these things. You will need some short header plugs. Accel P526S. They are pretty expensive. I paid $13 each for...
So what wire and what gas would I need for 304 stainless on a steel pipe?
Re-reincarnated thread! :rofl2: Well, since it is back up... Mine was sorta stuck on buzz mode, but not loud enough that I could hear it. I...
I have never done it with a mig, but used to weld stainless to cast iron back when I worked in machine shop. Never to a thin pipe, though. We will...
http://www.summitracing.com/parts/sum-694225/overview/ [IMG] Now I see why the summit ones aren't as strong. Hardly any material over the two...
I am in no hurry, but if I need to do some work on the transmission or something, I don't want to waste time messing with the exhaust first....
Mine is about the same place as the blue one, maybe a touch higher. If I am level with the top of the wheel I can see into the engine bay.
Frank, thanks for the picture. That is about how mine set before, so 2" is NOT too low.
Separate names with a comma.
