sounds like you put the frame mounts in backwards
Your either going to have to get a spreadbore to squarebore adapter and modify it to flip up side down or get a squarebore carb. As far as I know...
Any bigger than the stock Ho cam will not fit with those heads and 1.7 rr. I have an 86 bottom end with e7 heads and a b303 with 1.6 rr and I...
Yes but you may have to put a piece of pipe on the threads or it will bottom out in the spring perch.
Started working on my crossover pipe, also had a buddy tig my wastegate flange to to a pipe. I'm a little worried that it may be too close to the...
What gears do you have and what heads? Do you know your compression ratio?
Yes I'm keeping the powerjection, I just hope its going to be enough. If not I'll be switching to multiport.
Well I did not finish the other header tonight. I got side tracked trying to figure out how to run the cross over pipe, as the alternator gets in...
Almost finished with the right side header, should be done with it tomorrow. Does anyone know a good spark plug to run in a boosted 302?
I went to the movies today and while watching the preview for the Dark Shadows I thought I saw a Maverick/Comet so when I got home I checked and...
forgot to add a pic of the car
73 4 door turbo project Well I got this car in 2005 when I was 14, my dad bought me this car for $200 so I could learn how to work on cars and do...
More than likely a 2 stroke that small wont have a reed valve. It sounds like the pilot jet is clogged, I've found the easiest way to clean them...
never mind got it to work somehow. I think I had to add more word to additional comments to seller.
yes I filled in all the boxes.
I've been trying to leave feedback for the past two days. Every time I hit submit a message comes up saying there was an error in your deal...
Have you checked the condition of the battery cables? You may have too much voltage drop between the battery and the starter.
Get forged pistons and an aussie head and boost it.
If your going to do the valve seals in the car your going to need a special tool that screws in to spark plug hole(I think you can use a...
That thing must run great with the vacuum advance disconnected and pcv valve just hanging.
Separate names with a comma.
