Got the wastegate on today
You dont necessarily need to rebuild your trans but if it has alot of miles on it it wouldnt be a bad idea. To replace the pump seal remove trans,...
I'm hoping ill get there on 10 psi
Target is 450whp. Also need to rear gear to a higher ratio maybe like a 3.25 from my 3.80.
Thanks, those subarus can be pretty nasty too. Yeah Ive looked at it and have stolen a couple ideas. I have thought about relocating the battery...
A c6 swap would require a new trans tunnel, besides a c4 can be just as strong, weigh less and use less horse power. Did you use any sort of lube...
I like the idea, but then again I kinda did/doing the same thing. Heres minehttp://mmb.maverick.to/showthread.php?t=85555
Sounds great, you need a burnout vid next!
That turbo setup is for an acura integra. A good turbo for a stock to mild 302 is a t70 w/ .68 A/R turbine housing or a turbonetics 60-1
No need to build your motor the stock block will only hold about 600 hp. To do twins your lookin at at least 4000 to do your self. My single setup...
no looks more like a 76 nova or an amc
mid 90s neon seats
Got my supplies for my down pipe today, my original plan to run it between the front crossmember and the strut rod isnt going to work so I'm gonna...
Dont think so, more than likely your timings too advanced or your using too low octane fuel.
Thanks just what I wanted to hear! I'm hoping to keep it somewhat quiet at least until the wastegate opens.
How loud is this exhaust I'm planning on running my down pipe like this and wanted to know if its stupid loud at cruise?
Couldn't you use a lokar universal column shift cable?
Almost finished with the hot side gonna try to finish it tomorrow. Ordered some 3" pipe to make the down pipe, need to order a V-band flange and...
The capacity of a c4 is 9 quarts so youd be ok with 6 or 7 quarts
Yes but when it being bolted to a squarebore you have to drill a recess in it for the bolts to go in. Here's a...
Separate names with a comma.