but there was no "different pushrod" for the roller motors, correct?
I doubt it but i have heard that ford used 2 different valves during the late 80s, would mean 2 different push rod lengths..... Which would mean...
2 feet in the front, 4 feet in the back
THanks for the info, ill get right on it as soon as i get another timing chain cover gasket lol My carb was set at 2 1/2 turns out on each screw...
people with this cam are claiming 12" vacuum at 750 rpm, 20" at 2000 rpm So..... lean pop?
Pulsing between 13 and 16 (late timing mark.) I go to rev it and the needle goes down to zero and then into the normal range (17-20), then back...
Wait, your telling me that fuel shooting out of the front horn and smoke comming out of the carb, shooting flames is a lean pop? Boy, what a...
You know, i have done this for 2 years, this has never happened to me....:16suspect Why would the vacumm guage say late timing?
Put your hand in front of your face, there you go!!!! The tools needed!!!
btw did i mention the vacumm guage said late timing?
well i threw on maverick maniacs holley that was brand new and set to the lowest float level and again, capow.... Actually shot flames this...
And thats why its backfiring........
The spout things near the top of the carb. On the secondary barrels. Must have blown something inside the carb when i drove it home that day.
Ok ok ok, maverick maniac is going to let me try his new holley collecting dust in his garage. I think my holley crapped itself since the...
Well, without the spacer it runs alot better. Still spitting but revs to 3 grand.
Wasnt your car complete:16suspect
Separate names with a comma.
