Another good option for a relatively stock 302 is the Edelbrock Performer. It is somewhat close to the dual plane intakes used by Shelby.
I agree. When I swapped the points distributor in my 351W for something more powerful and modern, I changed the gap from the factory...
I just did this a few months ago myself, the first one I have ever done. I went to the dollar store and bought about 100 - 200 wooden close pins....
If there is enough of the stud left it is easier to cut a groove in the top of it and use a flat head screw driver to unscrew it.
The collar where the shift handle was previously located should still rotate when the floor shifter is used. I had an old Mustang with an...
Thanks everyone for the replies. Just thought I would post a follow up for anyone that stumbles across this thread. No problems with the...
Thanks guys, I will try opening the bleeder screws one at a time. The master cylinder and brake booster are the proper disc brake ones for the...
How did you disassemble the original cap as it looks to be riveted together?
My Maverick is a 75 with factory power front disc brakes. I had the front wheels off the ground recently and noticed that they do not spin as...
I know some people in here have tried Mustang rear valances on early Mavericks and Comets before. Has anyone ever tried one from a 71-73 Mustang?...
Very nice, very professional. What kind of brake booster and master cylinder are you using on there?
Would you happen to have a picture of the rocker moldings on the car? I am considering adding some to mine but I have never seen a photo of a...
Thanks Frank, I believe I do. Looking at the photo the trunk floor mounts I have look like the more elongated set of brackets in the picture. I...
I will soon be doing a small bumper conversion on a 75. I have all necessary parts, however the rear bumper mounts are quite rusty, but usable if...
Thanks guys. When I got the Mav with the 302, I never thought I would be limited as to what pan would fit this vehicle.
I wanted to put a cobra t-oil pan on the 302 in the Mav, but after looking underneath it appears nothing but the factory one will fit. Is anyone...
Does anyone reproduce the large hood stripe from the early 70's Comet GT? I have seen the side stripes but cannot find one for the hood. Was it...
Do you have to pop the trunk every time to remove the cap?
That, and the fact I don't want my kid leaving it at the gas station.
Has anyone ever disassembled a factory gas cap? I have a good cap missing the tether and a parts gas cap that is only good for the tether. I...
Separate names with a comma.
