Jeff, what did you insulate the firewall with?
The 69/70 Shelby valances are different than the Mustangs of the same year, as are the spoilers.
Removed large front bumper and replaced with a small one.
I believe the hinge covers from a 71 - 73 Mustang are the same....
I totally agree with this. I used the 620 lb springs on my 70 Mach1, and while it did make some difference in the handling it certainly roughed...
Years ago the early 351w head swap was about your only option for SBF engines. They had larger valves and ports, although the exhaust ports...
The metal piece looks like the plug located at the back of the lifter valley, it is visible with the intake removed. From the looks of your oil...
There is nothing to be gained by putting 351W heads on a 302 unless they are early model 60, 70 heads. If you do you may want to mill them...
Do like frank said, assuming the fender is correctly aligned. You can adjust the in/out by loosening the bolts that attach the door to the...
If you do not already have the 500 cfm carb, go with a 600 cfm. If you already have a 500 cfm, then run what you have. If you are going to the...
What year Mustang for those? They look very much like a 70. Has anyone tried them?
I have 15 x 7 Magnums on the Maverick off my 70 Mach 1. They have 225/60/15 front and rears. Absolutely no problems what so ever. I would not go...
If I do make it out I will definitely be looking for you and your car.
I don't think that blue balls special would clear my factory AC compressor.
I always use Simonize in liquid form to clean plastic lenses like those. I helped a friend do the tail light lenses on his Javelin, all the AMC...
You can get some for a Mustang or use Plumbers Putty.
I plan visiting on Saturday
Primed, painted, undercoated rear valance, primed and undercoated front valance. Cleaned, primed, painted front parking lights.
I don't know how well powder coating vs. paint will hold up against constant U.V. exposure, and if the item gets dented or bent, will the powder...
Get one from ebay with an emblem....
Separate names with a comma.
