I disagree with what everyone has said about keeping the green, it looks like crap. So I will do you a favor and take those door panels off your...
Plug it in using the existing factory wire than ran to the electric choke on the old carb.
Connect it to the original wire for the choke.
On a factory car I was always lead to believe that the plane of the trans angle and plane of the pinion angle were to be parallel. So if the...
If you are still not 100% sure your cowl is not leaking, a temporary cheap fix is to buy a pre-shaped magnetic strip that will fit over the cowl...
So true regarding "seasoned" blocks. I have seen people pay bucks to shot peen new rods to relieve internal stress in the castings.
Thanks guys. I was thinking the same thing about the factory one being inferior to even a cheap after market one.
Up until it hydro locked I was unaware of any problems, so the leak must have been slow. Once I found out there was a problem I fixed it as I am...
I have a 9 inch from a Lincoln Versailles that is going into my Maverick, but it is not ready, and I am not sure when it will be as I have other...
I had a car that was slowly leaking coolant into one of the cylinders. If you drove the car daily, there was no sign of any problem. I found out...
Is it just the disc brakes you are after, or do you need the entire differential?
I have a stock 75 maverick with a 302 and factory Duraspark ignition system. Does anyone know what the factory coil voltage output potential is?...
Holy %$#! I thought it was just my 75 Maverick that did this. At least it is reassuring to know there are others that have to take 10 minutes to...
Does anyone know, or can anyone measure the distance between the F O R D letters on the Maverick trunk lid? Thanks, Jason
Bryant, I like the sound of this setup. Does the new style starter have the solenoid on it, or still use the external mounted one?
Anyone in here have a newer hi amp 3g alternator installed with their battery and starter solenoid relocated to the trunk? I read that the 3g...
The wing with the girl is a 69\70 mustang. The 71-73 had shorter pedestals than the 69\70 and might look better on the car.
On a big bumper car the headlamp bucket will define where the horizontal fold is to be made for the top of the notch. You need to measure down...
My 70 Mach 1 has the switch in the floor shifter. The switch has a raised square peg that fits into a square hole on the shifter lever. That peg...
I was just wanting to remove some of the clutter from under the hood, but after reading Greg's post I may just leave it there. I was also...
Separate names with a comma.
