nice picture man
i set my timing chain that way when i took out the old timing chain ( it was at tdc ) the dots were not lined up the cam was at the very top so i...
ok so i just torque them and leave them thats it??.... and when i get new pushrods i need to do a compression test and turn the engine all the way...
here is a pic from when i had engine apart a couple months ago i dont have any new ones i can take one if needed tomorrow. from what i know they...
yea the guy that i had help me talked me through the whole thing and he has been working on fords for like over 20 years i mean he just rebuilt a...
ok ill order new push rods and see what happens. and ill get a compressor tester and do that too. thanks for all your help and more to come...
when i was trying to get the engine running it was backfiring alot and it was about half the times it just cut out but i thought it was flooding...
the cracked bolt is like the nut that tightens the rocker down like has a crack so when its tightened down it spreads. and i said this in my other...
how do i do that???? i have the valve covers off and the push rods out still havent taken the intake off yet
ok i went to take off my valve covers and both sides i have a bolt on the rockers thats cracked and most of all the push rods are bent so i have...
the top plate thats on the air horn? thats for the choke i thought
thanks guys im going to do that today and see what happens
is it just going from a smooth idle to a rough idle????
i think all the center links for power steering is the same no matter if i6 or v8 but im not sure
ok well its a stock 302 from 72, the buddy of mine that i talked about before, told me to torque them down and then back them off 3/4 of a turn...
i replaced the head gaskets and the intake manifold. put a new double roller timing chain and fallowed what the instructions along with what a...
yea i flipped the dist and set the screws like and finally got it start and it revd up to 2500 and smoke was coming out of my valve cover breather...
reset the mixture screws and now it backfires thur the carb with a big spray of fuel so lost
ok i can try that too i know i might be asking a bunch of dumb questions just never have done this and kind of doing this all myself... i know...
ok turned it and set it to number 1 started and ran for about 4 mins temp got up to 140 then it choked itself out like it was to rich and now its...
Separate names with a comma.
