I'm already looking at felpro 1133 mls gaskets. I guess I'll turn my timing down to 32* total my MSD boost timing retard pulls 15* max that will...
Afr's were about 11.5, timing is 34 total with 3* being pulled per pound. Now that I think about it, maybe pulling that much timing may have...
Only 10 psi, AFR's were good no detonation. I do have the cheapest head gaskets money can buy on there currently that are 4 years old (I was a...
Drove it harder today, started liking coolant out, it didn't over heat I think I lifted a head or 2.
Mines called the "Pimprick", a buddy of mine called it that, then everyone started using the name and it stuck. I like it, some people have called...
Well while burnouts are cool and fun, I'd like for there to not be the chance to blow either one up if I ever get traction haha.
Drove it down the street, boost came on and traction went away. I have a feeling my 8" or drive shaft wont like this very long.
Find a wrench that fits the flat part and spin it.
I can't see any pics. I hope you putting a mustang 2 front end under it, a Cleveland is gonna be a tight fit.
Drove it today [media]
Drove it for the first time with turbo. Needs to be tuned. [media]
I found a small brass fire extinguisher that had some really bad smelling liquid in it.
I believe the noise is caused by solid core plug wires, never heard of getting it from the dizzy.
Edelbrock carbs are a copy of a Carter carb that has been around for a long time. You really cant use the term carb and modern in the same...
Thanks, that's what I'm hoping for! Wired up the MSD boost timing retard box. Almost finished the intercooler to intake side today, tomorrow...
Do you use a pcv catch can too?
Cool thank you.
My turbo setup should be done soon, but one thing I didnt think about was boost effecting the vacuum modulator. Is there a check valve needed or...
It says to the side you have a AOD, did you modify the crossmember? An AOD will not fit the stock crossmember.
Are you trying to get it in from the top? You have to jack the car up as high as you can, then jack the engine up about 2-3 inches and put the...
Separate names with a comma.
