I HAD a good running and tuned carb. I swapped out some fuel lines, and it went to crap. It doesn't take much...
I don't think it matters. That bottom part of the radiator is separate from the engine cooling part, so if you go in one side and out the other,...
I had a similar low rpm miss, and was starting to think it was distributor/timing/cam related, but groberts helped me tune my carb, and much of...
More recently I have blacked out the radiator, since it was so obvious when it was bare aluminum.
I got mine shipped from Charlie Yan in CA for $179 billetart@yahoo.com but that was back in Feb 2008, so price is probably more now. [IMG] I...
Then I think you are safe regarding the head gasket.
If it blows between cylinders, that will give you that pop and stumble I was talking about.
My guess is dirty coolant. The plugs are fine, but look like they are running a little lean or hot. Head gasket would give you milky oil and...
AFR = Air/Fuel Ratio gauge. I had one, but when I got rid of the long tube headers, the bung went with that exhaust setup. So I sold the A/F...
I was under the assumption that my vacuum drop was from the load in gear, not the drop in rpms...:hmmm:
OK, timing advanced to 16, then rerouted the tube so it is idling with about 35 degrees of advanced timing. Idling around 900 in neutral with...
I work as a counselor for emotionally disturbed kids at a private school, and we had last week off for spring break. This saturday is a MCCI mini...
Gene...want to try that thing out on a mustang II conversion kit? I need 3 degrees of positive camber...:D Maybe 4. Or 4.5. Would be interesting...
Back to work, haven't had a chance to mess with it. If I work hard this week, I might get friday off to mess with it.
Honestly, when I purchased the carb, I called Holley and told them my setup, gears, shifting point, etc. and they recommended this carb for me....
The problem I had when mine was mounted just a few inches higher on the frame rail was that it would cavitate when I got down around 3/8 or 1/4...
BTW...what is Y axis on that chart? Is that engine size?
No, it was a good read and lots of good information. Gives me some things to think about and experiment with :thumbsup:
I guess you call it "ported"...only pulls a vacuum to the dizzy when I rev it. No vacuum at idle. IIRC...10 degrees. If I can get my cousin or...
I took this last week off to get my car lined up, and it is running pretty good, and finally STREET LEGAL!!! So we are planning on coming if the...
Separate names with a comma.
