Awesome, hopefully I'll get to show one off here one day!
Hello and welcome from another RVA mav owner! I have a parts car that probably has what your looking for, unless 4 door trunk lids mount differently.
Put my new fuel pump on, took an EVO driving coworker for a ride, he said "it pulls really hard" now he wants a race after he gets a clutch.
PFM..........don't know, curious too.
I was running the pump that came with the powerjection, but its getting a walbro gls392.
Early cars came with a 7.5 rear, the easiest way to spot this is it has a bolt on cover like a chevy.
To my knowledge all 8" rears had 28 spline axles.
Its still interchangable, but your car will be slower out the hole do to a higher ratio. Although you may not feel a difference as it's not much...
If it's a 8" its the same rear. Make sure the brake lines on the other rear are ok, or swap them. Also replace the U bolts most likely they are...
Drove it to work, took it out for a joy ride at lunch:chirp:, did one last good full boost pull before going back to work. Go about 500 more feet,...
I think this started in 73, I know the early cars are not like this.
It will be for sale when I get the car apart, I'll make a classified ad when I'm ready. I don't know when I'll get the car apart as I work a lot....
I've found that when they do this the best way to stop it is to tap it with a small hammer or screw driver handle.
Got the engine back together, drove it around, got some weird looks from people, and a guy on a motorcycle gave me a thumbs up. Then when i got...
Man those must be the world's best handling mavs or they guys in the vette and lotus aren't very good!
Somebody has probably installed a duraspark in it. They come with points from the factory. You can however install a large cap on the points dizzy.
On engines without marks on the balancer or a suspected slipped balancer I've always just test drive turn the distributor a little bit, keep...
Their speed shop is only about 20 mins. from my house, every time I've been there they been very helpful. I liked going there to order parts from...
They will fit but 351 heads use 1/2" head bolts and 302's use 7/16 head bolts so the holes for the bolts on 351 heads are bigger. You can get...
I think built sixes are cool but it'll cost a lot to build and still be slow unless your going forced induction.
Separate names with a comma.
