Powertrax no slip, its a locker not a posi. I have one in my car and love it, very easy to install and reasonablely priced. Or you can get a lock...
Fly wheel horse power.
I don't think you're gonna find it in that diagram......it's an open diff. I always thought the housing was/is part of the carrier, which equates...
They'll fit but why would you want to put a 2 bbl on it. If you have to swap it over you might as well go with a 4 bbl.
If you've double checked all the bolts are out prying it is the trick.
The next motor will at least have forged pistons, as far as internals go they will probably be left stock cause they're supposed to out last the...
Stock bore. Added video https://www.youtube.com/watch?v=G3eh3R2HuFg&feature=plcp
Got the engine out today, and pulled one head off and found 2 windows into the water jacket. My cylinder head got messed up, I'm pretty sure it...
That's what I usually do but for some reason photobucket won't let me copy the image.
It was an embarrassing 12.8@92 it was breaking up some so I aborted the run. I'm starting to think it may have been bad gas cause I filled it up...
A double sump will not work it hits the center link. You will need a front sump pan from a mav/comet or a mustang II, there may be other models...
I had mine hooked to the drivers side port and it ran great, when I hooked it to the passenger side port it ran like crap couldn't even get it to...
Took her to the track yesterday and on the second pass she let go, no warning just a bang. I don't know if the rod was what let go or the piston....
All those things listed to get it running are easy as long as you or someone you know has some mechanical ability, or you're willing to learn. I...
I believe he said in another thread he was using a cent. supercharger. I don't know much about supercharger setups but don't they use about the...
A set of trick flow twisted wedge heads w/ 2.02 valves with fit with most cams up to .550 lift depending of duration. I have TW heads w/ a b303...
Good numbers! I think 11's are there with a 347 and 7 psi. Also good to see another fast 4 door! Any pics or video?
I would all that you mentioned and change the oil as it becomes acidic as it breaks down. Also I would drain the tank and maybe clean the carb if...
The steel gear came out in 85, it was in a mustang gt witha roller cam. I believe it was the only duraspark to get a steel gear
A c6 will not fit with out cutting he tunnel. A c4 will be fine behind a mild 351. My c4 is midly built and has been holding up to close to 500hp...
Separate names with a comma.
