I haven't looked at them closely, but I am hoping that my drilled and slotted ones have the slots spaced out the same way. If not, I won't even...
It doesn't "lift" OFF the ground, but the pressure will lessen on one side and become firmer on the other, and an open rear will spin the one with...
Good to know. I was going to line up the grooves and lay one of the drilled ones over the top of the non-drilled ones, and mark all the centers...
I could always buy drilled and slotted front disks, but these have less than 200 miles on them. Maybe I would be better off filling in the...
I have a couple of drill presses, and a Bridgeport milling machine. The actual job is not an issue. I just don't want the disks to explode to...
My rear disks are drilled and slotted, fronts are just slotted. Would it hurt the mechanical integrity of the front disks if I used the rear...
That is what I always assumed. Same reason the same front tire comes off the ground for those few guys who can get one off the ground. 21...
Made it to page three. Paul S chimed in there.
I replaced the o-ring, and if I recall correctly, there was another seal that I had to swap from inside. Did not affect the leak at all. That was...
http://www.allfordmustangs.com/forums/classic-tech/127170-c4-transmission-gear-selector-shaft-throttle-valve-shaft-leak-solution.html Came...
More accurate than a wrong speedo gear...
I quit messing with the gears and put in a TomTom One gps. It sticks to the windshield and gives accurate GPS speedometer readings regardless of...
I hate when an easy job becomes a major ordeal like that. What caused it to seize? Just a long time without being moved?
On my most recent engine build, I needed them on exhaust valves, and bought a set of 16 for like $15 bucks or so, from a high-end engine...
Duh! Obvious...but great idea!
They both come out the same way. If it is stuck, gently use a hammer on it, or if you have a slide hammer, that should free it up. No clips or...
I swapped mine without moving the steering column. I had long tube headers and had to drop one. But other than that it came right out. If it is...
I stopped using the bronze gear because I heard that it would "dissolve" over time, slowly disintegrate from grinding with the cam gear. Is that...
Alright!!! I got two of my long-standing major problems fixed in one day1:dance: No more drone, and no more carb hiccups!!! It transitions...
MUCH Better! WAY better. Highway speeds and there is little noticeable drone, get on it a little harder and you can hear a little, but I can...
Separate names with a comma.
