Thanks guys, got her done. Pulled all the harness from the donor and only had to connect 4 wires to the existing harness. I had forgotten how...
If you must replace them you may want to consider getting a set that eliminates the eccentric. [IMG]
I just got a pair of the SPC 94210's but have not yet installed them. If I get them done before you I will post the results. My feeling is that...
Do you have a shot of the underside available?
Converted from points to Duraspark ignition. Installed an amp and speakers.
I covered the pillars with the same headliner material.
I would lean towards something close to 700 cfm and no less than 650. With a 650 you will probably have to re-jet it to accommodate the intake...
[ATTACH] Although it is not shown in the picture, I mounted the coil horizontally under the AC bracket using the bolt circled. It is somewhat...
[IMG] The 7-7265 and 7B498 is what needs to be replaced. The nut labeled 356071-S is what needs to be removed to get the shift lever out of the...
I intend to get a set of these soon after the new year as I will be doing a disc brake conversion as well. If I have to change the spindles,...
I picked mine up from Summit. The aluminum ones are pricey but what isn't these days. http://www.summitracing.com/parts/sme-1006r/overview/
I do not remember if the tank came with the fuel neck grommet or not. However you may also want to get the gasket for the fuel neck to the tail...
Here is a short thread on it. There some others as well. http://mmb.maverick.to/threads/aftermarket-air-conditioning.105290/#post-1070322
Doc, there are actually two things you will probably need if the leak is coming from the lever. One is the seal you posted above. You will have...
Separate names with a comma.
