I have never seen that before, but it would appear that your alternator has a short to the case, and the case is shorting to the bracket. The...
Did you get greasy replacing it, and did some of that grease get onto the exhaust manifold or pipe?
Just about any Ford wheel will fit from the early and mid 70's. The 3 spoke sport wheel seems to be a popular one. When you are looking, make...
Yes, another cam question from one of the village idiots. I have a budget build stock H.O. short block with mildly ported 70 351w heads fitted...
I somewhat recently updated to a 130 amp early 90's Mustang alternator and used a 289 HIPO/Boss 302 single v-belt alternator pulley, which was...
I replaced the core on my 94 Taurus, took a full weekend. The car was totaled about a month later. Glad to hear it is back together.
I use Simonize a rag and elbow grease. For delicate areas I use an old tooth brush and tooth paste.
My only exception to that is Magnum 500's.
Unless you are trying to build a museum piece, or are a purist, these cars are not cars whereby you destroy their value by deviating from...
The physical dimensions are the same but depending on the year the arm rests and door handles are in different locations. However, if they are...
[ATTACH] [ATTACH]
Might be wrong, but I believe most of the new timing covers have the crank seal install from the front which makes it much easier to replace if it...
I am biased but I like the Weiand Stealth, Holley 4 barrel, and a 14 inch chrome air cleaner.
Covered the passenger door with black marine vinyl.
Too late, one door done. Should get the other one done next weekend.
They were made as an assembly, the bucket, socket, and connector. Outside of replacing the bucket assembly, I do not think Ford made them to be...
With enough force you can remove the sockets, but they are not supposed to be removable from the buckets.
Looks like a 76, or at least the grill? I agree with MOJO, I would save the drive train for last. The car needs to go stop and track first, but...
I cannot recall what the SPC specifications were for alignment. I asked for 0 camber, 1 - 3 +caster, 1/8 toe and the same settings for left and...
Should work no problem, I swapped a 75 to a 72 without issue.
Separate names with a comma.
