The photo of the Maverick with Cougar tail lights is a wing for a 71 - 73 Mustang and is mounted backwards. The photo of the Comet looks nearly...
Thanks guys. The B303 looks a little too stout for this modest build.
On automatics there is a rod that connects from the steering column down to the tranny. If this rod is removed and the column wired so that it...
Definitely check your mounts, but you could also use a FL-300 oil filter. It is an inch or two shorter than the FL1.
I am not 100%, but looks like you need a sending unit and o-ring. Is it leaking where the plug attaches?
I think the cost of these items in carbon fiber would be ridiculous. I am sure Mavman would be better suited to answer.
After trying various setups in Engine Analyzer Pro it looks as if the factory H.O. roller is the best bet given the stock gears and converter. In...
I do not recall my 3g having that raised lip on the housing around the drive shaft. What if you removed the front housing and ground the lip...
I believe it is the same on the Mavericks/Comets as it was on the Mustangs. The P/S was quick ratio compared to M/S. As it was not true P/S but...
My 72 Comet 2-dr has them.
I was thinking about doing the same using the 73 Comet GT stripe and placing it up higher than normal.
I could not agree more and that is exactly what I have been spending the last two years doing. Switched to disc brakes, repaired the power...
I have had the same problem with those bolts. I wedged a large screwdriver between the tower and brace right where the bolt was. That gave me...
Mine was initially like that when I first got it. Some of that may be due to the crummy caster these vehicles inherently have.
Put them on the car and measure, then you will know exactly. Spacers are not cheap.
That is the power assist control valve, (have heard it called other things as well). There should be some slop where it attaches. If it is too...
Is there a timing pointer installed, and numbers on the harmonic balancer? If so, rotate the engine until the timing pointer points to about 10...
I used parts from a 71 - 73 Mustang column, perfect fit.
I think Hotrock nailed it. That is exactly what I would have recommended. I think the Weiand Stealth is one of the best intakes for the small...
Never hurts to have policeman friends.
Separate names with a comma.