The 1405 is a 600cfm carb, its the same as the 1406 but with manual choke. IIRC the 1405 is jetted slightly richer than the 1406 from the factory....
Back when my car had a carburetor I was using one of those pumps (Mr gasket). I found that the was no reason for the mechanical pump, ditch the...
You can use a pry bar to pop the seals out, you will have to buy new seals as this method will damage the. Another method is after you've remove...
Guess I'll just have to make some then! Was hoping this one part I wasn't gonna have to fab. Thanks for the help.
Has anyone used the competition engineering sub frame connectors on a 4 door mav or if anyone knows if they'll fit? If I have to make my own what...
Thank you!
I think the way you worded that may have confused him. You are still running the vacuum advance but it is hooked to manifold vacuum instead of...
I got the rods out of the M/C's but the clip broke as expected, I went to an auto parts store and couldn't find anything that resembled this style...
Sounds like a seized caliper. Jack up both front wheels and see if both are free if one is stuck you found your problem, if both are free have a...
I have manual brakes, I'll give the old rod a try when I get hoe from work tonight.
This is the little window, when the metal piece inside reaches the other side the lights come on. [IMG][/URL][/IMG]
I just swapped to discs on my car and now my brake lights don't work. I know I put the switch back on correctly, if I look at the switch while...
I think you can beat your goal, just throw a lot more No2 at it. It may be a glory pass though.
Sure when I get the car back together its all apart right now.
That's what happened to my last motor, ran the hardest it ever had breaking tires loose at 70mph. Next day I took it to the track and that was the...
Sounds like a good deal, the non h.o. engines of that year had the crappier e6 heads and cast flat top pistons with no valve reliefs. Not a bad...
Best thing to do with your 302 is swap it for an 87 or newer 5.0, can be had at junkyards for very cheap and also has like 75 more hp.
Well guess they'll need to call a real glass company.
One from a mav or comet are the only ones that will fit. I think you can get a new one from a glass company like safelite.
Most headers for a sbf have 3" collectors, you need a 3" to 2.5" reducer. I'm also assuming these are long tubes? Shorties may have a different...
Separate names with a comma.
