Go to a local tuner meet and look for the "hella flush" cars and ask the owners if the have one. They may be willing to rent it out. There's also...
Eastwood makes a fender lip roller. A little pricey though, a guy at work has one he made his money back by renting it out to people.
Blow outs suck! Had my first blow out at 70 mph with cruise on, on the second day I had my license when I was 16. The truck started vibrating...
I've seen 3 single bbl's on a i6, but never 2 carbs.
I did my car with satin black and gloss black trim, I like the look.
What I meant by that was if there was ever one made from the factory.
A 302 is a small block ford so it uses the same bell as a 250, but you also have to make sure which flex plate you get depending on what year 302...
On the AOD the bell housing is part of the trans case. The 250 uses the same bell pattern as a sbf but has a different imbalance, so if you want...
The bearings themselves will wiggling a little if they need a grease repack, they'll also wiggle some if they had them off the car to show you....
Are you sure you don't just need the bearings repacked? The hubs usually don't go bad, maybe you just need new bearing s and races. The only...
An aod or 4r70w if you want to stay auto, or a wc t5 if you want a manual. You will need an aftermarket controller if you decide on a 4r70w,...
Depends on what you want to get out of it. With your budget sounds like you should be able to build a nice engine.
Started making sub frame connectors for my 4 door. [IMG][/URL][/IMG] test fit. [IMG]
found these ford coffee cups under the carpet. Cant make out what was supposed to be on the other side of the yellow cup cause it got stuck to the...
The rear is supposed to be good to 400 hp with a manual transmission. My 8" and c4 have been holding up pretty good in my car with about 450rwhp,...
Question is why would you want to put a 2.8 in? Aren't these engines know for not being very reliable?
I should have made an exception for the 98 zj w/ 5.9. I'm not 100% sure but I think they have a different trans, same as the ram trucks.
My guess is 9.54:1. I believe the stock pistons have a 4cc dish. Basing on stock 5.0 h.o. is a 9.0:1 with 4cc pistons and 64cc chambers (e7 heads).
If its a 4.7, run, run far away those engines are junk, I've seen them throw rods on many occasions. If its a 4.0 getting a broken spark plug...
Been a while since I've updated this tread, and there isn't really much good news. I did get it running again and the new(used) engine runs great...
Separate names with a comma.
