I doubt what I have will work as it is all from open centers. I didn't think about that before. I do have a 3.50 with a mini-spool in it but I...
Sounds like it is later model 302 or 5.0 heads. I cannot remember what year they went to the 5/8" plug but I think it is around 80-82. clint
:bowdown::bowdown: I like the looks also but totally agree about the acid. lol clint
My money is on the dried up gas in the carb. I does not take very long for the gas to evaporate leaving a nasty white ash looking gunk all over...
Do the 72 Mavericks track like the F100's did with the rear wheels tracking inside the front wheels? Just looking at my 72 Maverick and it looks...
SO I was thinking right then? The small gears on the pins are the spiders? The one that is splined and accepts the axles are the side gears? So he...
I must be wrong but I was thinking the spider gears were different from the side gears that mesh with the axles. Now..it has been a long while...
Are those the oval ones or the old style round ones? If they are making the old round ones again I'll go and buy some. Anybody remember those? I...
All I know anything about is the 67-72 F100's but a lot of that transfers over. On those the horn button works by making a connection in the...
Now I might be totally wrong on this but... If you look into the side where the axle is supposed to go and see a cross then it is a 4 pin spider...
That is one NEAT Dodge. I like a lot of the older Dodges. I feel a bit of camaraderie with them as both Dodge and Ford have always been treated...
A Detroit would replace the entire Differential right? I can't tell by looking at the back side if it is an 8 or 9". The 76 F150 4x4 I had was a...
The Grabbers came with 8 1/2" wide rims? I don't think Ford even put a wheel that wide on the pick ups. I would love to find a set of those for my...
I think there are 2 ford units. There were some older units that came with Detroit lockers in them but I am pretty sure that was only in trucks....
I think it is Ford's Trac-loc. If you look at the back side of the differential where the ring gear bolt heads are you can see the recessed area....
I know there has been some confusing about which coil to use with which set up and what voltage to use. Or rather to use straight 12volts or use...
I think the tach numbers need to go around as far as the speed odometer does. That way it would be able to go up to 8k, be easier to read quickly...
I think you would also want a set of ported and polished aftermarket heads, a heck of a camshaft, a set of aftermarket rods and pistons with all...
Welcome, I have a 72 I bought recently. Have not had the money to do anything to her yet clint
Got a good belly laugh out of that one. Thanks! :) I have heard of the eggs and Pepper also. Seems like I recall the panty hose as well. The...
Separate names with a comma.
