It's not a whole lot of unsprung weight, but every little bit counts :D I just wanted to point that out because i have to keep reminding myself!
1badmav: First of all, the G20 calipers will be fine as long as you aren't getting more stopping power in the back than the front. If you are,...
you probably need a new heater core. They're cheap, but a lot of work. If you gotta do it, you gotta do it, though.
The people above are correct--the roller motor will cost you more to rebuild... BUT!!! It is a lot less likely to need the amount of work a...
It is pretty much literally impossible to guess hp based on mods, for many reasons. First of all, if you have a restrictive exhaust, for example,...
That's been a long time hobby of mine. My personal favorite is all the parking garages downtown here...some of the upscale ones have a lot of...
Yeah, i wanted to put in my .02 on the 351-based 427...not reliable at all for the street. Best to stick with 392 or less.
BMCDANIEL....i have been thinking about using an electric fan for a while now--do you use yours on a stock (mine is 3-core) radiator, or does it...
I agree with 1badmav. On the one hand a 427 would be cool to see, but on the other they are a heavy motor and don't have very much aftermarket...
As i said before, i'm no AOD guru, so take it for what it's worth, but: My understanding of the AODE OD band is that you only need the band, not...
I don't know much about the AOD's, but i do know that most them came with an A, B, and C overdrive servo (the weakest part of the AOD). The B and...
Looks great! I don't see why you can't take it for a LITTLE test drive without the exhaust though ;)
I have seen some synthetics that are clear too, like Valvoline. If it smells like p/s fluid, and it feels like it, then it must be!
I have the bobcat taillights too, and i'm really happy with them. I have picked up several pairs for $40 (they're all spoken for though). It...
I just noticed the other day they sell the "289 hipo" pulleys in Autokrafters. I don't know how much they'll underdrive, but every little bit...
Yeah, lots of discussion on here about weight (it is one great thing about these cars). My understanding is that the subframes were made out of a...
I prefer the loop (again, it's all personal preference). Basically cut-pile will have individual fibers sticking up (like grass) whereas loop has...
I know you said you didn't want to do it with the motor running, but i have actually noticed a seat-of-the-pants difference by adjusting it that...
I used to work with a guy who drove an old "beater" van around. He didn't care much about it, and had lots of other cars to drive, so it was his...
Thanks Bossmav, that's exactly what i was looking for! :bananaman
Separate names with a comma.
