I am not 100% but I think it bolts to the bottom of the front bumper. There is a slot at the bottom of the bracket for the plate to sit in and a...
You can use one for a 69/70 Mustang. They are smaller and look a little different but do the same thing. [IMG]
I thought I was the only one to paint and undercoat the back of bumpers.
The only thing that scoop should be off of is, off of that hood.
I tend to agree with Larry. You may be able to pull it off if it was a total murdered out job, but I like chrome. Having said that, it is your...
The only difference I have seen between Maverick\Comet shifters and 69-73 Mustangs is the shifter arm. The Mustang one on the right is a 67-68...
Basically, this is what you are looking for....
The valve body is held in with a few bolts, very easy to pull. If you have a C4 laying about it may not hurt to familiarize yourself with it...
It is messy but not hard. There is a single nut that holds the lever in the transmission. The valve body does need to be dropped to get access...
Are there any casting numbers on that intake?
I like fel-pro.
Here is the manufacturers site. http://newvintageusallc.mybigcommerce.com/1969-series/
The top of it is smooth.
Was the car originally column shift? If so, I used the blue wire in the steering column that was for the gear indicator.
I apologize if this is not the proper place to post this. I am trying to find the fastener shown below. It is the tail-panel attachment for a...
If it is mainly stock or slightly modified, the Summit branded 600 vacuum secondary sum-m08600vs or a plain Holley 600 vacuum secondary will do...
Turn the headlight switch knob counter clockwise. When it stops, turn it a bit more and you will feel it click. That click should turn on the...
Finally got the battery in the trunk. Works fine.
Does the dome light work with either door, only one door, or not at all. Does it work when you try to turn it on from the headlight switch?
That is correct. Some people have been able to rotate the factory column shift lever 180 so it could operate with a factory type floor shifter....
Separate names with a comma.
