clean looking install, I used a 4 prong trailer connector for a wiring harness when I did mine.....good job, now get that Fram filter off of there...
Those tires are way skinny, they are 2 inches narrower than the 235-60-14s I had on the back and for my taste way too tall, I'm trashing these...
Here are the pics Pics of the BIG SCORE :bananaman
are you sure it wasn't a 200 that it came from?, go to the parts store and get them to pull one for a 200 and a 250 and compare them
I have a buddy that is in my car club here in Jonesboro, he has a 62 Fairlane made up like a Thunderbolt.....anyway he is the type that is never...
Yeah, scratch my ealier post......the carb being dead on one side sounds logical to me, I didn't know what cylinders were paired together then....
So you are saying that 2-3-5-8 wires are actually firing but maybe not at the correct time, if so what type of rocker arms are on the engine, are...
I remember it too I called about that car a few years ago, I think it was in Oklahoma. The guy told me it would take 4500.00 to take it off...
Mine was built May of 69 and also had the black engine compartment.
correctamondo!!
Its the passenger side line on the bottom of the radiator that is the return, thats the one to connect it to. With it in line with the one in your...
I too tried the Pertronix last year and got a bad one, it was an ignitor II and I found later that lots of people were having problems with them....
69.5 versus 1970 69.5s had lighter duty front end parts ignition on dash smaller transmission tunnel shocks were not staggered most came with...
I'm in the dark Who's Nick, and why would he be jealous? :huh:
I bought a car last year for a parts car and it didn't have any keys to it and I couldn't get into the trunk, well today I took the seats out to...
Welcome ! GGGRRREAT looking car..........love the color, and once again :Welcome:
My specs 87 roller block and heads ported polished w/ 194-160 valves Torker 289 Intake w/ 650 Carter AFB TRW forged flat tops Lunati Voodoo...
What is the correct pressure What is the stock radiator cap pressure, I think mine has a 16 psi, but it is an aftermarket.
I had 2 1/2 pipe plus collectors ran to the rear end, provided my own mufflers and they turned them down. 180.00 and it's professional looking.
I bought a cherry 77 Cobra II Red and White with a 302 in it with less than 50,000 miles on it about 10 years ago for 500.00, the owner said the...
Separate names with a comma.
