Charlie-I realize that they are not mutually exclusive, but I've found that many more with disc brakes have boosters than not.
Two questions: 1) The long tunnel line at the engine bay side has a different size fitting on drum & disc brake cars. Did you use some type of...
FYI: Non disc brake & disc brake cars are different, including the long front to rear line that runs down the tunnel. I just did a factory...
Virginia Mustang has new washer bottles for 69/70 Mustangs that are factory Ford replacements. They are the only vendors that have any of these...
Did you guys see the 70 Grabber Orange, Grabber Maverick with all original paint on ebay also? He staes no rust! It's only up to $400 & it looks...
I've tried that clock swap before & I coudn't make it work without cutting up the consolette. The clock face is a tick too large & it was...
Actually, the easiest way would be to do it like the 65/66 Shelbys did. Relocate the upper control arm down one inch. I attempted this & found...
I doubt that it is Saleen, as he just moved into that huge new faucilty last year & he has more room than he even uses in his new faucility....
Are you sure that's not some kind of trick computer photography or something??? LOL. Very impressive!
If your car has factory air, one goes to the heater valve on the cowl & the other goes on the vaccum cannister on the pass. side inner apron. Hope...
Okay, here's the latest thought on the booster to upper intake clearance problem. It appears that I could possibly cut or grind off the...
I'm using a 89 Mustang upper & lower intake & it's pretty obvious that the brace will not clear, but it looks like the booster is very close to...
I've just dropped a 5.0 EFI motor into my Maverick. I have the factory power disc brakes & haven't installed the brake booster , mastercylinder or...
K. Merring- Can you tell me more about what you did to install the fuel tank anti-slosh surround for the fuel pickup?
The seats are of a different size & it will not work. I have a set of Mach buckets & they are physically larger. A quality upohlstery shop can...
I am in the process of completing my swap, although I elected to stay with the C4. This swap presents several challenges that are unique to the...
Separate names with a comma.
