Get the right hose and keep it from running moving parts and off the exhaust and you'll be fine.
Home made through the floor for ground clearance. Welded to the torque box in the rear and the floor supports up front with plates on each side...
Bolt and a copper washer and you'll be golden.
File this in the back cobwebs of the brain in case it happens to me in the future!
Take a look here, it might help. http://www.1bad6t.com/Maverick/repair/clutch_transmission_03d.html
That's a good thing!
Probaly not but I am shooting for 22!
Looks like it is, maybe the 4.11 will get the nod.
Tremec has a good conversion app on their site, I go to it when I start waffling on which gears to run. https://www.tremec.com/calculadora.php
I don't have to ask!:beerchug:
I did an early TKO into mine and did some floor surgery as well I also built my own cross member which I copied from the style they sell for the...
I had that problem in high school, the rod was too long as described and would lock my brakes. Being young and ignorant I was cracking the bleeder...
These are the quality welds on mine! [ATTACH] [ATTACH] [ATTACH]
The holes are locating holes I believe and they are welded (poorly) from the factory. Mine were actually missing when I removed the seat, you...
That's cheap for seats, you did good on that purchase!
They sure look like LDO seats minus the headrests. Hopefully you have the correct tracks, if not they can be a bear to find. Pretty sure you could...
I have still been pecking away on this jewel. I need to wrap up the bottom and get it back down so I can do some cleaning and move my work bench....
I actually used floor pans for the 64-68 Mustang. They aren't a perfect fit but Joe's floor pans weren't out yet. Here is a link to his Facebook...
Don't listen to Stu, you want to stick your finger in the hole, have the plug wire dangling near your hand and have someone crank it with the...
Cut the excess length off the bolts. Make sure to run a nut down the threads before cutting it, file the threads at the end after cutting it and...
Separate names with a comma.
