Why did I think you wouldn't agree?:) The modern FI car uses a line not much different in size. The 5L fuel line is no larger and fuel pump 88...
Respectfuuly, your trying to way over engineer the fuel system. A good mechanical pump on the engine will provide all the fuel your motor can use....
bad mav , im cool. You just know i'm not going to let a smart mouth go unaddressed. I to am one of several moderators on another board. Been...
TL you tried to change what I said in my post by the "suggesting remark" that is far from what I said. Now address it! and stop hiding by...
TL you should really stop the nonsense! I never suggested anything of the kind; and you know it. It's just your twisted way of interpeting...
How do you know it didn't crack from detonation? To much timing, not enough fuel etc. Any block can be lost for those reasons even with a blower....
Since I done mine back in 1996 I can give you enough to get a handle on the project. 1. Get a copy of the Ford Fuel Injection book by Probst. 2....
grabber, These are the things I try to bring out for the attempts to re-arrange the brake systems with various parts from other sources. Some...
There were two mfgers of these valves, Wager and Kelsey-Hayes. There should be a total of 6 ports. The 2 close and oppsites each other on one end...
Ya man :clap::clap::clap::).
Those tag numbers are for a dealer or other source to use when ordering parts. For instance a CA. car may use a specific part where a PA. car may...
I believe it.
Whatever you say boss.
xpsnake. with respect, if your rear brakes are doing the larger part of the stopping power as drum brakes or disc, you have negated the reason you...
Your thoughts of getting around the proportion valve issue won't work as properly as you think because the application is altogather different for...
Scooper, awhile back I had reccommened against those heads and met with a small fire storm against me from some other board members. You now see...
You need to decide what block you want to use. There are parts to do whatever you want to do. Some basic things like the distributor, oil pans,...
To answer post #10, no you cannot use 'flat tappet' hydraulic lifters on a roller cam profile.
Between 69 and 77 there was two different deck heights for both the 302 and the 351w. 73-77 351w are the taller deck. 73-76 is the taller deck...
Your cam is not all that wild but will perform in the upper rpm range where head selection to match, is important for best overall power. Staying...
Separate names with a comma.
