Air cleaner is K&N I'll look into the wires.
This is great guys. Thanks
Si senior. Muchas gracias.
What do you guys use to plug up the holes in the firewall? I have all sizes, Swiss cheese really. Is there some sealant I can use that will also...
[IMG] The girdle installs pretty easily. I have to still make sure the lifters don't hit the girdle on rotation. [IMG] [IMG] [IMG] [IMG]
The markets on the stud is normal according to the engine builder. The stud on the right is the stock one and the ones on the left a little taller...
[IMG] [IMG] [IMG]
I sent you a PM, thanks for the pics in advance.
I'd like to take a look at your setup. Where do you have a pic?
I was talking to Bry about that. How would I move them and still keep the geometry intact?
So I tried doing the bracket but I had to tuck the 1x1 bar really far up to keep it from hitting the 9" housing....in these pics I'm actually...
If I was as bad of a doctor as I was a welder I wouldn't have any patients alive for follow up appointments. So you are basically saying for me...
Should I keep my metal hood and just add pins or is there an advantage to getting a fiberglass hood? As for the air dam, if anyone has any...
Ok so grind more next time right? I'm assuming that would remove the galvanized coating. May not affect my welds but I'm sure my lungs and...
So these were the hose ends I got that attach to the rubber hose which is rated at 250 psi but according to one reply by a summit tech person it's...
[IMG] [IMG] OMG...this was the most painful annoying frustrating and slow process ....I had to put little tiny welds down and they looked like...
Bryant and I put a lot of time into figuring out all the right parts but looks like we gonna have to make some changes. I should mention that when...
So looks like after some research the hose that is advertised as twist tite is NHRA approved, but not for fuel line purposes. Summit doesn't try...
so I get the stuff in the mail from summit and the hose I purchased were summit brand rubber hoses for the fuel. the website says they are nhra...
just for mockup, gonna try to use either one inch square tubing or I might try rectangular tubing. if I use rectangular I might be able to notch...
Separate names with a comma.
