i will display my ignorance by asking: what are boomerangs?
28" & 430 gears work well. if you are buying both, put the biggest tire you can under the car & then get the proper gears for your mph.
yes it was a 351w motor. .030 over, flat top cast pistons, offy 360 intake, D0 heads opened up, open headers, roller rockers, 750 dp, cold air...
unfortunately the only way to be sure what size knurl u need on the longer stud is to remove one.
should rev close to 6000. what is .050 duration on the cam? what size tires? i ran a 67 mustang (about 200 lbs lighter than you) with a larger...
might need the gears to get into the 12s. but should be high 12s area.
what you should look for is to turn the lift of the rear (separation between rear tire & body) into forward motion by limiting the extension of...
i have a dif brand of shocks. avo i think. on them, turning clicks cw dampens the extension.
cool idea!
my setup is somewhat different. 4 link w/ coilovers. much of getting the rear susp is trial & test. we set up mine by setting springs/shocks equal...
what engine? usually on a 302 it goes in the intake manifold.
carter makes a good hiperf mech pump. usually about $60. how big are your fuel lines? are they crimped/flattened any where? clogged filter?...
i could be wrong, but i thought all 302 distributors were the same as far as dimensions. is one for a 351W? it would have a 5/16 drive slot in the...
have u seen that on more than 1 pinto? that filter is listed in the trans supplier books as a bronco with deep pan filter. i would wonder if that...
always a good idea to install a trans cooler. if you drive on the street much, i would worry about mounting it in the lower valence because of...
if you can get the adjustments sorted out, and its really only a 650, it should run fine on your setup. just have to get it tuned down to your...
looks like a barry grant demon of some type. should have a part number on it. probaly worth more than your carb, unless u dont care for bg carbs....
yeh, my son ran there this weekend to see how it was. now that 75-80 closed, he needes a new track, & mason dixon is a 1 1/2 hr drive. he gets out...
as long as you realize that the oem wont live forever in your car. let me know when you're in the market for a straight cut. once in a while i...
1.76 oem, i hope. not a 1.82? what did they want for the straight cut?
Separate names with a comma.
