I didn't mention Summit. And even then, who's to say what direction it actually turns when you consider the buyer could be looking from either end...
He simply needs a "standard rotation" pump. Forget the clockwise/counterclockwise thing. That'll just confuse the "parts people" down at the...
There was no "76" Boss 302. If it don't have Cleveland style heads on it, it's not a Boss 302. If it doesn't have screw in core plugs, it ain't a...
If the starter isn't engaging, then I'd say the solenoid is a prime suspect. I'm having the same gremlins with solenoids, none made today for...
I'm well aware of what can happen with water in the cylinders. You're preaching to the choir here, I'm not some noobie mechanic stumbling around...
Seems like I read somewhere they used the old T-bird towers in those cars. I'm assuming those from the 64-66 ?
Yep, that's a 3 speed if it looks just like a Toploader, it's a tough sumbitch, just leaves a lot to be desired from the gear ratio standpoint. If...
What they did in the old days to those cars was adapt different towers out of another application into the car they were working on. If you need...
The only reason I ended up with the McCleod unit was it was the "only game in town" way back when I bought it (around the turn of the century)...
If it has 3 shift studs sticking out the side, it's a 4 speed. 3 speeds had 2 shift studs (the levers attach to) The late 70's , early 80's units...
That would not have been the case until that last time I fired it off after the gasket fully let loose. No water ever got into the #3 cylinder....
All that may be true but I still had a 10.4 to 1 comp ratio with the 9333PT1's. The heads were milled .060 long time ago for use on a 302 cid...
Mine seal just fine on my Canfield heads using Percy's aluminum gaskets. Bolted them up with a set of MrGasket aluminum gaskets last week but...
Do a search here. I just did mine last year using an older McCleod hydro throwout bearing and a Modern driveline kit. The kit works great, but...
The 9333PT1's are also graphite composites. And these held up admirably for 11 years. If I'm not mistaken the HP graphite gaskets have a different...
Not in this case. The pressure would have been counteracted against the coolant in the system. Only a full draining of the system then leaving it...
Dunno why anyone would chose shortys in these cars. The install is a piece of cake, the right side falls out by itself when you unbolt it. The...
Ok, got some time to work on it today after enduring the IRS's abortion called "Obamacare" .:coco: The head gasket after closer inspection was...
Just FYI: the Pitman arm connects to the center (or drag) link. which connects to the idler arm on the passenger side.
Separate names with a comma.
