http://store.summitracing.com/partdetail.asp?autofilter=1&part=HOK%2D6901HKR&N=700+400390+4294925073+4294908331+4294908284+115&autoview=sku
I have overhauled with only regular hand tools, But to do the job rite and set all clearances and torque specs rite you need at minimum, A spring...
Chances are its hung on the axle flange, The round part just below the lugs. Spray penetrating fluid around the flange and lug bolts and just keep...
Remove the coil wire from the cap and ground this end of wire, Remove the distributor cap, Hook dwell meter as you normally would, slightly loosen...
If you use the 5/16 line you may not be able to regulate the pressure low enough if using anything other than the RED pump from Holley. I...
The last one of those races i went to, the tickets were 45 per head, But what really took the cake was, 95 + degree tempture with no shade and...
If something with your rebuild doesn't go rite i to rebuild C-4S also. I'm not but 100 miles from Memphis. I will give the same deal Pauls gives....
The PMS is plug and play with any stock computer, This way if something happens to the stock computer you can just replace it and not lose your...
http://store.summitracing.com/egnsearch.asp?Ntt=timing+cover&N=700+4294908331+4294840126+4294887723+115&Ntk=KeywordSearch
x3........
My 331 is 0 balanced, It is the EAGLE kit, I personally wouldn't fool with the stock computer, Especially if you are starting from scratch. If you...
I thought some might find this interesting. This is a fully adjustable, Self contained 4 wire dizzy some might find interesting. Needs no ignition...
Could someone post where this sticky is, I cant find it. Thanks
I think that is where the -B,E,A comes into play. I didnt realize i had put one number without the -and letter.
I noticed you said the sensor is built into the hub assembly, I have never saw the sensor built into the hub only the " TONE RING" is on the hubs...
Welcome, I live in MS. just across the ALA-BAMA line, But do most of my racing in BAMA.
If it a 5 bolt bell, Casting # C30E-B or C4OE-B If its a 6 bolt bell, Casting # C5AE-E These are the #S i have for the HPO 289. The HP 289 also...
:dancing: YEA! And I Love all the BLOWERS! :dancing:
I would worry about the vinyl top defect before the bumper defect.:burnout:
I would still be intrested in these answers.
Separate names with a comma.
