+1 Always do if i want to remove the wires at a later date.
The problem with overfilling any automatic is the fluid will get into the rotating parts and cause the fluid to foam. Foam will not cool or take...
Usually on most parts the "B" would mean second reversion or second making of the part. Here is all i could find on the #s....
Usually BUT NOT ALWAYS the reverse rotation pump has metric threads that hold the pulley and fan. If you have the back off here is a sure way to...
Here are a few that are not as pricey. http://www.promotionpowertrain.com/1870533.html...
http://www.barrygrant.com/demon/default.aspx?page=18
6901 Hooker.
I have never saw a T-5 behind a 4.6 these were T-45s, But the bell housing didn't come off, It was part of the trans case. NOW i'm not saying Ford...
I only want to comment on the stud girdle, If you plan on running the STUD girdle and not a BOLT girdle then you will need to have the line bore...
I personally run the MSD and ACELL products because i cant take a chance on a timing fart. 8 PSI of BOOST and 150 shot of spray wont tolerate a...
I do use a boost referenced regulator, But mine is a wet kit and a separate fuel system for the SPRAY. We use one of the ZEX dry kits but its on a...
The DRY kits are usually made for fuel injection.. The only way i could see to run it with a carb would be to richen the rear barrels of the carb...
You can run any module you want with the MSD. My preference is this one....
I dont have a Tach that i can see while racing, Only a shift light. I do have a digital tach in my ignition programmer that sits between the...
I wouldn't run a Bronze gear under any circumstance. I ran one for about 100 miles and it had already worn into the teeth. A buddy of mine ran one...
A lot of the hi-po bass boats use a water pressure gauge. So i would assume one could be bought from a marine dealer. Here is just a quick search...
This one is my favorite gauge. Especially when its in the white range. [IMG]
Im going to try to explain this as simple as i can, Either a electric pump is dead headed, Bypassed or has a FPDM (Fuel pump driver module). What...
To big or small when the needle in the carb shuts the fuel off the pump goes into a bind, This wears the pump no matter what you do, unless you...
Electric pumps are much over rated in my opinion, Unless you run a bypass regulator the electric pump is ALWAYS under a load. So why run something...
Separate names with a comma.
