If its shifting OK keep the slick shift, We have ran everything in them from synthetic 90 weight to 20 weight motor oil. The only difference we...
Anyone seen these? I cant find a price anywhere though. http://www.holley.com/6901-3HKR.asp
A little story here: When i built the stroker motor i couldn't get the Lunati cam i wanted, (They said they were out of the cores) So i ordered...
If its arching where the fuse is touching the contacts, Then this is the problem area. I use a small round wire brush, Such as a rifle barrell...
First i want to imput on turning the drums, Brake shoes are made to fit a specific diameter hole. If you open up the drum the brake shoes no...
Residual valves are only used if the Master cylinder is below or even with the wheel cylinders. These just keep the fluid from flowing back to the...
It looks like an old Motorcraft carb to me, I at one time had one but never did run it.
Mine didn't, Blew the rear caps off the chunk, Broke them in half. A 8 Inch will take a lot of abuse, But i can promise if you start pulling 1.6...
Hooker is actually about 25 miles from my house, They coat their own headers and a buddy of mine just took some fabricated headers he made to...
http://store.summitracing.com/partdetail.asp?autofilter=1&part=VHT%2DSP102&N=700+115&autoview=sku My local autozone also carries the paint, It...
VHT actually now makes a paint for headers, And it works. I have a 6 cyl jeep that i have been swapping stuff (heads, carbs, ign.) Anyway i have...
If it hasn't been run lean, At least this is what i was told. And its their discretion to decide If it was ran lean or not.
I wont argue the fact that the heat may weaken the metal, But i took a set off my car (6901s) that had been ran for probably 5 years. My boys had...
Had a set of jet hot, As a matter of fact i still have them on the car. But they are wrapped now because the jet hot bubbled and flaked off. I...
The long tubes produce MORE bottom end torque.
Maverickman had some very nice cowl hoods, but i don't know if hes still selling those. If hes not this is where i got mine, Its not the most...
I think The real issue is WEAK caps, Where they are drilled for the lock bolt is where they bust nearly everytime. If someone would machine some...
I did buy a set of these last year and tried to make them fit, I cant remember the exact location but one tube on the passenger side hit. They...
I appreciate that but really anyone that can read can do the same as me. All it takes is read till your eyes bleed then read some more then go...
And put the drivers side on first
Separate names with a comma.
