The top is, the bottom one comes out.
Thought of another, Got a bearing race that you just cant seem to get out. Use a welder (wire works best for me) Run a bead around the inside of...
Since you mentioned valve grinding compound, Ever had a big nut as on a spindle that the threads wernt quite rite? Take some valve grinding...
At this time there are no "Bolt On" adjustable drag shocks for the rear, There is some that can be made to work. Use the "Search" at the top of...
I also use this method to work on the valve springs as i don't like to use a air hold. This way there is no worry about a valve falling if...
Not all roots style blowers have the "corkscrew" rotors as a matter of fact they are not really roots type blowers. In most circles they are...
I have another, Have you ever tried to remove a pilot bearing with grease? I know they make a puller i have one. But instead of grease try loaf...
Green Is for FAST (girls).
Here's the cheapest, When trying to start a bolt you cant reach and have to use a socket. Double or triple ( depends on quality or how worn the...
We do run motor oil in most of our C4s, I have personally torn these down for a fresh up and the clutches as well as other parts look better than...
Yea got the error just as you said.
It also helps get the right side front wheel off the ground when you pull the left on launch. :rl:
I just tried and it worked
1 No as the other end is open which will relieve the pressure, Although i would check pressure with koeo, And after start up. just to make sure...
Just be sure its the 1 piece and not the 2 piece, Or has both pieces if its a 2 piece. The one i rebuilt had only the inside piece and was missing...
Some of the older models had the inside of the pump eccentric already on the cam, I rebuilt a 88 a while back and it had the eccentric.
It was around 70 degrees friday, Now look. Just gotta love Mississippi weather.
Im sure you know, but be sure to support the bottom a frame with a floor jack before you knock the spindle loose. Also this piece is a lot cheaper...
They may be the same or may be higher, Holley moved the manufacturing of the headers from Mexico to the town i work in. So I'm wondering if the...
Don'T want to hijack the thread but has any one saw this ignition. For a few dollars more you can have full electronic control. This is by far the...
Separate names with a comma.
