Naw the guy that actually did the painting didn't, But the first guy i tried to get to do it was real interested, Wanted to know all about it. I...
Was in the mountains last week and had a guy to air brush me a shirt.
That is the correct flexplate for a roller motor with a small bell C-4
Most of my electronics are Accel, which they no longer offer. But we have one car that uses the digital 7 from MSD and it works as good or better...
These are the ones i always use, They last 2-3 years before they need replacing. They are bulky but the added bulk makes for some dent and ding...
That s the reason for setting total timing at rpm, This just makes it easier for someone that doesn't understand the concept of mechanical...
If it was balanced at 28 oz then you need the 28 oz balance flexplate, The bell housing will determine if you need the 157 or164 tooth count...
Pauls is telling you how to set total timing, some cant comprehend base and mechanical, So the easiest way is just set total timing, That is why...
Mine is ole school, I have a 50 watt amp and crossover for the tweets, A 75 watt amp and crosover for the mids, A 200 watt amp for the 6X9 rear,...
If they are new gears and bearings i would run regular gear lube for the first few hundred miles, Then switch to synthetic.
I have ran the Amsoil for years with no gear noise problems. We also run the synthetic oil in our 8.8s with no noise. It also seems to make the...
I never had the problem of throwing the belts, Mine would actually BURN the belt in too. I tried many different kinds and the two i found that...
The old carburetor PROPANE systems had a fuel shut off solenoid. I dont know where you could get one though, Might try a google search for propane...
Its on the fourth paragraph under the C4 data by pauls.
Here is the best helmet i have ever used, It adjust for the light conditions and weld brightness. It is awesome....
I never use sealer with a new gasket, Have never had one to leak either. The trick is to get the pinch weld as clean as humanly possible. I use...
Maybe you need this, This is what i have. http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=46389
A 671 Supercharger sticking through the hood would really make them talk.
Must be a good morning ( i don't have to work) anyway they just keep coming to me today. Ever need to enlarge an existing hole with a hole saw?...
This is the best i can suggest, If you want to keep the factory stuff you will need a wiring diagram. But this is the best move i made ....
Separate names with a comma.
