Don't have a pic of one mounted on my cars 'cause I haven't gotten 'round to it yet. I just like to give advice on things I don't know anything...
Good post. To add to that, if using exhaust clamps to mount the bar to the axle, be sure to tack weld the clamps to the axle once you have them...
Remember, not all Mav/Comet engine bays were body color from the factory either. My '71 has the factory black engine compartment. I prefer the...
3 stangs actually, Dave. There was an extremely limited run of convertibles made. See pics here: http://www.angelfire.com/sports/1972mustang/
Saw it tonight. Got to agree they did take a healthy amount of liberty with the whole artistic license sort of thing. All in all though we...
Actually she did take a bad turn in the "dark Phoenix" storyline when she was the black queen of the hellfire club.
Crap I just realized this thread is over 2 years old! :slap:
Maybe give these folks a try. Located in Prince George, B.C. http://www.hi-performance.com/DomesticRebuildKits.htm
Wasn't me either. :D
Bearings won't be a problem. Should be available at any NAPA/Partsource/Canadian Tire. Worst part of the swap for me was re-doing the brake lines.
That's what I suspected. Anyone got an extra one they wouldn't mind parting with? I assume they were probably a Mav/Comet specific part, and not...
Finally getting around to finishing up the floor shift conversion in my 4-door. I have the floor shift collars for the steering column but just...
ratio, the blue wire doesn't retard the timing, as mentioned it's just a fusible link for the module. The white wire's function is to retard the...
The diagram I have shows the blue and red wires tied together and connected to a switched 12v source (hot in start and run).
The blue wire is a fusible link for the module. I think they only used it in '74, but they could have crossed over into '75.
Don't forget headlight bezels, grille if it's good, door handles, window cranks, glass, side markers, front turn signals if it has them, emblems,...
Well, I've rewired it without the jumper and now it disengages properly. Sorry Dennis, what can I say, I like to live on the edge :D And as...
lastchance - yeah I kind of suspected maybe that's what's up, but like a few of the other folks here I get kind of leery about having a big wire...
OK, where I'm at now is, I found a mini starter at salvage out of a '97 F-150. Wired it with a jumper according to the diagram Ray (courier11sec)...
Don't think it's a timing issue Ray. I just double-checked the timing when I started driving it again after winter, so unless the timing chain...
Separate names with a comma.
