Another thing to consider is how boring a 2 speed may be to drive.
I've heard that a 351C crank can be machined to fit. I have not seen it for myself so I am unsure how true it is. You would probably be better...
Is it possible to put both the Comet and Maverick scripts on the same cover? I'd be interested in a pair also.
Look to the Mustang II's. I found a set of 3.55's in one at a local junkyard.
Wjhile I can't speak for their trannies, I also had one of their converters. They are pretty cheaply built. Do not skimp on a transmission or...
Jeremy, The hood was somewhere in the neighborhood of $450. It fits like garbage. It's an Unlimited Products hood and if I paid $10 for it I...
Thanks Dennis and Dan. We just got it back together about a week and a half ago. There are just a couple of odds and ends left and, of course, a...
I feel for ya', John. I just got done going through it myself.
Unless the car has real tall tires, the 4.11's are way too much for a stock motor. My guess is that you will run out of motor before the end of...
They put the motor in backwards. Everyone knows the distributor goes in front. :rolleyes:
If there was no leak prior to your waterpump installation, it's absolutely pointless to change the head gasket. Why go through the headache when...
Is your lift still over .600 after lash?
You really need to check with the cam manufacturer to get the correct spring pressures. You can have 2 cams with the same specs but require...
IMHO - 1964 Ford Fairlane Thunderbolt
I have the same issue at times. I am also having trouble accessing the main page now. When I can pull up the main page, I am not abl to access...
1) Yes. 2) Probably would not want to turn it much past 7000. They'll take more than that but could be at the expense of longevity.
How does it accelerate when the car is moving? If it runs well from a roll, the converter may be a little on the tight side.
Compression is going to be your limiting factor here. Duration and lobe separation are the aspects you are going to have to pay attention to. I...
I ma not positive but I don't think Boss 302s were made in 1973. At any rate, if it is truly a Boss, the motor should have Cleveland 4 barrel...
There is no such thing as minor vibration from the rotating assembly. ANY vibration from the bottom end is a bad thing.
Separate names with a comma.
