We really need to know what bolt it is to help you. Is it where the headers bolt to the heads or is it where the headers bolt to the exhaust pipe....
Also you need to look and see if the little spring clips (anti rattle clips) are installed on the correct side of the inside pad. They go on the...
The last solid lifter engine I built was a 392. When I built the engine I set the lash and stuffed it in the car. I started it and broke in the...
I normally use semi gloss wheel paint. The stuff is made to take the abuse and will go on well and look very nice in the end.
I was in the Army when the MPs used to drive them around. All the ones I saw that they had were 250 I6, Auto, Radio delete, No A/c. They hated...
I think you mean 72 different than 73, Hehehehehe
Do you need the whole hinge or can you just replace the pin and bushings?
They are called Soft 8s. They are made by Pacer. I have them on my 69.5. You can get them in Chrome as pictured or Black.
Yes sir they are. Look for 77 to 79.
I believe that it only has one key way. The 3 sets of timing marks are so it can be used on any of the 3 different places that Ford put the timing...
You are only about 2 hours from me. If you need anything let me know. I know where there is another 74 4 dr the same color as yours I think I can...
Where are you located in Kansas?
OK with the calculator in electronic land it is 10% off. But in the real world, on the road, if he is running 60 mph on the speedo and is 10% off...
You are off by about 20%. Not a uncommon problem. You need to pull your speedometer cable and count the teeth on the gear. Then you need to find a...
Get it alighned and have the Tech put about one degree more caster in it. Oh, these cars tend to wander, LOL.
Relocate the springs in 3" (there are several ways to do this). Use a set of Cal-Tracks. Mini tub the rear wheel houses. Now you can put just...
I only use roll bar kits from S&W Race cars. I have installed 3 of these and they fit perfectly. The 8 point cages are all cut and ready to weld in.
Does it really count if absolutely nothing in, on or around the engine is actually built by Ford?
I don't think the spring perches are in the same place. The 86 perches are wider than the 77 I believe. Other than the fact that the 77 is a 9"...
Some things that I have learned when doing front drum bakes is this. 1. Turn the drums to the exact same inside diameter. (as close to the same as...
Separate names with a comma.
