yes these threads produce some really great ideas
The pan should just be able to drop right down unless you have the V8 belly bar in the way then you would have to remove that
When I converted my car to a floor shift I used the original floor shifter out of a 75 parts car I had, their was a hump that goes over the hole...
I've herd this on an engine before right before it spun a rod bearing
Welcome to the forum :Welcome:
Usaully happens when im making a left turn, it will sound like something is being hung up and breaking loose i can also feel it, i was thinking it...
Put a new idler arm thinking thats were the clunking is comming from but no luck, maybe a bad ball joint
Is their a tech article on how these brakes go together on our cars or do i need to figure it out as i go
What all can i use
thank you for the info
I'm wanting to put disc brakes on the back of my car but need to know what all is needed to do this swap and what vehicle can i use parts off of,...
Which kit did you end up ordering?
I'm looking at these mustang Valances with the cutouts for the exhaust pipes and want to put one on, I have seen people with these valances on...
Hello The Wire that says coil does in fact go to the coil, and the single red wire on the other connector is your fast idle wire i believe. does...
I used peel and seal on my floor and it worked really well
when i did my V8 swap from my 250 inline 6 i reused the torque converter and flywheel, just buy a water pump for a 73 302 that would be late...
Installed my monte carlo bar today and i must say it looks and fits great
another project for when the comet is at paint
Will the hood scoop be blacked out also
ok i tried jumping the wires at the fuel sender and got nothing at the gauge, i unplugged the wires in the trunk that go through the floor to the...
Separate names with a comma.
