Several of my friends were there. I'll have to make a point of going next year since 1.) my maverick will be done for sure. 2.) now I know there...
I pounded mine in with a hammer and used a socket that fit over the rubber part and rested on the metal part of the bushing. Make sure you clean...
What company did you end up getting your cam from?
Yes but it's not that hard
In addition, most auto parts stores sell an aerosol can of plastic adhesion promoter that you spray on before the top coat to help the paint stick...
Ok, makes sense now.
I have to ask this question. Why didn't you just adjust/push the fenders in to close up the hood-fender gap? Now it looks like your hood-fender...
Thanks Dan
On my 72 I also converted to manual steering and discs. I got my steering parts from a 73 maverick.
Hmm, I thought they were shorter. I'm pretty sure the tips are shorter at least. Either way its something that needs to be taken into consideration.
And I believe typical chevy valves are shorter than ford valves so you should keep that in mind because it can effect installed height (which will...
To reiterate once more.... You shouldn't be asking on here about what springs to get. You should ask the cam manufacturer and buy their springs...
I didn't catch what cam you have but I'll repeat what olerodder said. Get springs that are recommended by the cam manufacturer based on the actual...
The finer the glad beads or sand, the duller it will turn out. Use a coarser media if you don't want it to end up very dull. Use less pressure....
Looks great! What kind of coating is that on the carb?
I've got a pair of Strange 31 spline axles made for a versailles rear if you're interested. And yes the versailles rears are the perfect length...
Have you checked to see what guys are using with a mustang 2 swap in an early mustang? I'm sure you could find at least a few that put 302's in...
Are you concerned that the heat from welding has compromised the seal made from the panel bond and now there is potential for moisture and rust to...
That is VERY nice! What type of finish is on it? Do you have any picturea of it on a car?
You're certainly welcome to do that. We can talk about it at Carlisle. Let me know the dates and where you will be staying.
Separate names with a comma.
