The port work on these heads is quite nice. They were returned to Summit for the scratches circled with the marker in addition to some high metal...
Does anyone on the board have any experience with these heads? I bought a set off the Summit demo rack for a 347 project sometime in the future.
RTV 159?
I really like the color also:clap:. Unfortunately, the tow dolly no longer matches the car:(
Something to keep in mind,. There are regulars on this board who are routinely running 12 second ET's with stock stroke 302's in street trim. That...
Ford was the king of cluttering up an intake manifold. It was a major PITA just to access the idle mixture screws on the stock 2 barrel carbs!
I use Gorilla brand lug nuts that have the smallest OD of any I have found. They even provide you with a special wrench when you buy a set of 20....
Since Mavericks never offered with duals, you will probably have to take it to a custom exhaust shop and have a system bent up for you.
Those Eddy's are capable of some serious flow numbers when properly ported.
Very "Clevor" of you.:bowdown:
Groberts, have you ever looked at Professional Product's intakes? Some of the roughest looking castings I've seen in a long time ( dishonorable...
I'm painting mine. When it quits spraying, I'll refill it. I'm also making SS attachment ears and mounting them with a blind rivet sealed with...
If you seriously plan on adding forced induction or nitrous at some point, spend the extra $$$ on a Boss or Dart block.
Gets me to wondering if one could pulverize the charcoal into smaller pieces like gravel that would easily allow you to service the stock...
He has improved since then.....a lot:bowdown:
I was thinking about going to one of the later model plastic canisters to ditch a little weight. They are not cheap, however at $70 and up. Don't...
Can these canisters (mounted behind passenger side shock tower) be serviced or rebuilt? I know they contain a charcoal filter, but mine is...
That Stealth is one of the best dual planes out there for the 302 and it is one of the most inexpensive. The Eddy RPM air gap may or may not be...
I used a cheap Harbor Freight, dremel type tool with a cut off wheel. I cut through the center of the pins.
[ATTACH]
Separate names with a comma.
