transmission Hey, I am in the process of doing some swapping with a guy. He has a 1986 AOD that he says is in good shape. If you are interested...
my 2 cents I have owned: 68 SS chevelle, 65 torino, 66 F100, New at time 85 then traded in for 86 Corvette, 69 mustang fastback, and a slew of...
I had a 66 ford truck that had a vibration in it, after changing the U-joint.. I thought it had to be in the rear end.. wish I had known this...
If you look at the distributor; is there a module on it? If not, and there is a vaccuum advance canister, you are good to go. You only need to...
I believe this is radmav's. Very sharp car!
Have you checked in the maverick forum want ads at the bottom of the home page? All kinds of parts there.
U-joint The hardest part is pressing in and out the bearing caps. If you have a vice and a couple well placed soccets, this is a real easy job....
thats the ticket Hey thanks for the link to that article. It will deffinitely come in handy. I block sanded most of my body work to get it...
I did use an epoxy primer. 2 coats of paint and 3 coats of clear. The clear had alot of solids and is really tuff to sand. I will still have to...
So, Degins: If I want to convert to front disc brakes on my 1972 maverick, do you have the complete kit for it too?
Thanks for the heads up. I will keep an eye on the bearings just to be safe. I have only been running them for a few months. For me it was the...
Not to dissagree with you, because I'm not an expert, but isn't it the same difference as putting on a set of deep dish mags? You are moving the...
I have 17X7 on mine with 1 1/2" adapters all the way around.. If you use adapters you can put just about anything on. my adapters are aircraft...
just one more question.. What exactly does color sanding do??? I was planning on wet sanding the clear after a few weeks of drying then buffing.....
Thats kinda what I was thinking but the paint store said it was ok.. would rather not chance it. The paint store also said that I could paint in...
I painted over the original factory paint, that was sanded almost completely off. all body work was sanded to bare metal. only places that the...
OK, I painted my mav myself and well, it didn't turn out as well as I wanted. I painted it in a poorly lit garage in very hot weather and it has...
electric pump part # I got the pump from Auto Zone. It is made by Master. Part # E8016S It comes with fittings, 2 small hoses to connect to...
what engine are you putting in your mav? Do you really need to cut them?
mounts Aren't the maverick mounts the exact same as the 69 mustang mounts. If so I would tell them they are for a mustang. auto parts stores...
Separate names with a comma.
