I agree. Id like to see how close I got it when Im thru. Thats a sweeet maverick you got going there Craig! PS we use black beauty for media...
PROGRESS TODAY!!! I read about the control arm bushings on here, so I checked em out on my car, I could turn the long bolt by hand!! So, I got...
I may have to do that. I messed with it all day yesterday, Before, it liked to wander, so I tore into the tie rods. The passenger side, I could...
LOL, Dont take this the wrong way here,,, but around here, no shop will touch a car this old. I called 5 shops in the local area, and they had one...
Yee Haw! The most fun repair. Im getting ready to dial it in today! Toe in is out, Caster needs to be reset since I had the bars and bushings...
That is a strut rod (not a torsion bar) and is controls caster. No wonder your front-end felt like it fell out. you need to replace that, and the...
LOL! I hear that! For some reason, when I had the cable hooked up, it would shift mushy, kinda erratic in its shift points. We had a crown vic...
I think Ill follow suit on that one. I took it out for a drive tonight, I hit a bump in the road, and it felt like the whole front end fell out...
Does it hold oil? 90weight gear oil? Chad
I left it unhooked when I ran it in my t-bird. I had to test and retest till I got the tranny started upshifting. I just pulled on the cable a...
69.5 manual gearbox, there is a bolt, with a lock nut on top of the gearbox. Whats the proper proceedure to adjust the endplay in the worm gears,...
I found an old Echlin dual point distributor from dad's old race car the other day. No vacuum advance, are they any good? Dad bought it new back...
Check the head gasket torque. Bolts come loose from gaskets swelling and shrinking from heat when new. May have popped a fire ring, and it can do...
is this the dizzy your gonna run, or you got this one now? Do you still have the stock Dizzy that you took out of it? with the duraspark box? Hers...
Ill have a look at it! Blindfolded, meant I got no Idea! LOL! I used to have a real good book, I loaned out, and never seen it again,, Was a text...
Are the cyls wet, on the same side or on opposite sides? If they are onthe same side, check and make sure the primary jets are the same....
PaulS, could you put the tranny up on a motor stand using the bellhousing somehow? Guess it depends on how or whats being done. I have an old case...
How many quarts does a typical C4 transmission hold, after a complete fluid change? Drained the torque converter, and changed the filter. A while...
Rings. Id bet they did not get seated right upon break in. You can wash the oil out of the cyls by flooding it with gas. Would create the rings...
Thank You very, very much! ChadS
Separate names with a comma.
