i ended up buying the calipers at Autozone, Napa had a 20 dollar core charge per side and they didnt have any in stock, i wasnt going to buy...
maverick and granada wheel bearings and seals are the same just came from autozone same part numbers all around, seals and bearings are the same....
the way i "burped" my systems was to have the car sitting there off, cap off and pump the upper radiator hose allot until the coolant level stops...
check you ignition wire thats what i forgot when switching from points to the accel
i also bought a blaster 2 coil at the same time
i have the accel unit the installation is pretty simple and straight forward. dont forget to gap your plugs wider once youve installed this kit....
i was replacing the springs and didnt have access to a coil spring compressor at the time. so i just compressed the spring by lifting the lca with...
The KYB gas adjust ones where recommended by maverick man and i trust him quite a bit. theyre pretty inexpensive too
it seems to me like if we set up a grounding rod and attached that to our sacrificial medium itt could work. sooo in my mind a small hook mounted...
unfortunately i ran out of cash on this project for now. i have to also figure out how to fix my control arm bolts backing plate (the ridge that...
i recommend multiple applications of PB blaster i sprayed my manifold bolts with it over the course of 3 days and they spun right out no problems....
this makes me think of the high sulfur content in GL5 and the Brass components in an aisin5 transmission. might have been able to save a...
dont forget long tubes wont work with a column shifter
that sucks i bought some hedman long tube. summit lied to me :(. i should learn to research my purchases allot better.
sorry to steal the thread what headers do work with a stock column shifter?
i bought the Accel kit from summit thing works great i still have to go back and regap my plugs though. its also a good time to replace plugs,...
how does the rotor fit on the spindle? is it tight or supposed to be loose? i ordered granada rotors but i have the stock 72 drum spindles. do i...
but the Ox would be a good swap for someone that has a 9" or an 8.8" swapped in? or is there a car 9" and a truck 9"?
unfortunately there isnt a one stop shop for maverick parts. at least not that ive found yet. AutoKrafters is good but pretty expensive. for motor...
cool this post made me realize whats wrong with the chevy luv im driving (apart from it being a chevy, and apart from it being a luv)
Separate names with a comma.
