The engine cranks when I jump between the battery lug to the terminal with red/lt blue wire. Guess I'll order a new switch and pray that's the...
Thanks. I mistakenly left off the red/gr, red/blue and brown wire off the diagram but all three are connected on the correct terminals. Do you...
My engine turns over when I jump it from the solenoid but not from the ignition key. When I turn the key electric fuel pump works, turn signals...
Thanks for all the great advise! I'll be posting other questions. I'm praying I can get the car running so we can make the trip to the National...
My brake lines are standard drum brake. Everything fits but the routing is convoluted. Here's a picture from the drivers side.
I did a front disc brake upgrade on my 73 Maverick. Looking at it now I'm not sure if the metal brake line, hydraulic hose and mounting hardware...
Thanx. Still have a few bugs to sort out.
Still no turn signals. The green, light blue and white/red hash wires all have power at the connector. I removed the switch assembly and removed...
Thanks Craig. I located one small wiring issue so while I still don't have turn signals I do have all [ATTACH] lights working now in parking...
Thanks Craig. I located one small wiring issue so while I still don't have turn signals I do have all lights working now in parking light mode....
I replaced all bulbs, bulb sockets, flasher unit. All of the grounds have new terminals an are attached to shiny metal. Turning on the parking...
Here is what I ordered. $680 - 9" Housing/Axle Package (1973 Ford Maverick) - Big Ford (Old-Style) Housing Ends - 51-1/4" Housing - 43"...
The engine I had built makes too much power for the 8 inch. I needed the 31 spline axle shafts and I wanted trac lok and bigger brakes.
I went with Quick Performance.
It's been several months since I gave an update. I retired in October so I'll have more time to get this project finished.
You should call Laurel Mountain Mustang and raise this point of their system vs MOOG. The system I received has all US made parts and the...
I installed this complete end kit from Laurel Mountain Mustang on my 73 Grabber. The coil springs come lowered one inch 7/8 dia. sway par....
No. Either a 73 didn't have the tabs or they broke off. Should my year have them? If so what do they attach to.
The plenum box that goes between the center dash vent and the blower housing is very loose at both the vent and the blower. It looks like there...
Thank you. Now I can finish the MSD wiring with some piece of mind. What about the electric fuel pump? I have a red 10 gauge already run to the...
Separate names with a comma.
