If the steering box has play it can often be adjusted by the big nut on top of the box.
Theses are like the ones I used with my Brazilian panels:...
:Welcome: from a fellow '70 owner. Yes the '70's had a small front anti-sway bar. A V8 bar is a good upgrade.
https://www.fuelcurve.com/goodguys-2019-ppg-street-machine-of-the-year-jimmy-shaws-200mph-maverick/?utm_source=newsletter&utm_medium=email&utm_cont...
I have 'em. I kept the stock bar because I modified mine years ago to use a large lynch pin on the end instead of the goofy square retainer that...
My ignition key lock was stuck, too, a couple years ago. 45 year old grease can get stiff. Took it apart, cleaned out the old grease and lubed...
Or, if you have an old bellhousing, you could just use a California Pony Cars adaptor to mate the T5 to the old bell and use the existing clutch...
:Welcome:from south central PA.
I have got to get me one of those god shifters. Has to be better than my Steeda TriAx. LOL
Don't know for sure but they looked like this setup from Borla. [IMG]
Local guy with a big block has independent runners with four 2-barrels, don't know what kind. Could never get them to run right with the wide rpm...
I ran the Street Demon for a year or so on mine, I loved it. The engine absolutely screamed when that big secondary opened. :D
The only thing my old Ford service manual says about oil pressure is that you should have at least 20 psi at 2,000 rpm. Doesn't mention anything...
Yeah, not everyone has a problem and my instance was about 15 years ago. I just didn't care for Edelbrock's "solution".
A little late but somewhat related... Many years ago I ran an Edelbrock 6-valve fuel pump that shot oil out the weep holes all over the engine...
I have '76 discs on my '70, they're probably the same as your '75 steering knuckles. I went with the '76 outer tie rod ends. There was a...
Read that article. There must be a difference between the early 157 tooth flywheel, as used in the '66 Mustang and has a C3XX engineering code,...
I won't run a mechanical oil pressure gauge in my car ever again. Had a gauge leak one time, not the line but the actual gauge. Oil came out of...
7 hours for me. I'll be there.
Anytime you replace anything on the front suspension, except the stabilizer bar and shocks, you need to reset the alignment. My caster/camber...
Separate names with a comma.
