Any difference in the bolt pattern of the bottom of the seat on a 4 dr versus 2 dr?
Were the early 73 bucket seats non-catalytic type? When did the change over occur?
Another link:http://50chevy.freeservers.com/Suspension_Widths.htmlNote that drum width is different for the rears, 6 vs 8, which accounts for any...
Just out of curiousity, what is the actual purpose of the metal band which is riveted inside the Maverick filler necks?
I picked up a really nice one complete with cable and knob assembly at Carlisle this summer for $30. Probably should have taken the other 2 he had...
Who has a source for a USA made windshield for my 72 Grabber. I will be doing the swap in the near future. Are they tinted?
I just finished replacing mine on the passenger side. There is a rubberized pad that is attched to the track to keep the glass off of the metal...
Okay, I went to the best hardware store in Phoenix and bought the following: 2 hex bolts 2 washers 2 speed nuts 2 fender washers 2 hex nuts I...
Jeff: Is that a pic of a Mustang bolt or a Maverick?
I found a decent valance as mine did not have on when I bought the car. I have a 72 Grabber. I noticed that there is a round hole with a square...
Someone posted a source for a USA made windshield some time ago and I cannot find it now. Whoever knows or posted this, could you please post the...
I am not sure where the stock location is. I am only guessing where it was based some residue on the inside. This will give me a basis for trial....
The rear view mirror was not mounted when I got my 72 Grabber. I amassuming it mounts to the windshield as there is a gold residue left in what...
I would leave the lighter in place for now and retrofit a power supply later to run various audio/video accessories.
Thanks, that helps some. What I really need is a pic showing that mount off of the engine. I need to examine the configuration to see if it is...
I need some closeup pics of the power steering brackets, especially for the one mounting to the block.
If you wan to go exotic, you can go with the DUI from Classic Inlines. It is a 1 wire hookup and the coil is self contained inside the cap.
Latest dyno test using an aluminum head on a 200 yielded a whopping 221 horsepower at the rear wheels. This was using an Autolite 480 and a DUI....
I will install mine here in Phoenix in a week or so. If it survives here, it will survive anywhere.
I just bought 2 rolls of the Peel & Seal at Lowes for my floor also. It has an aluminum foil backing with a rubberized asphalt and polymer layer....
Separate names with a comma.
