Not sure what "fender well supports" are. I removed everything that the R/C kit instructions told me to.
Did this last time I pulled my carb. Freaked out, then ended up using a new nut. Started the car and it ran fine. Pulled the car out of the...
No problem reaching my bolts... [IMG]
What I don't like about the x-pipe is that I lose the side to side engine lope and rock at idle. Still there a little, but it doesn't rock the car...
Cliffs Notes version of my LONG story, I ended up with an oversize 7 qt oil pan, and my 6901s would not clear. I went with Hedman Shorties and...
15X8 with 4.5 BS also.
So, based on Jeff's response, you cannot just ask "How big?" as much as "How big in Brand X?" will fit...
Not really easy to install. Engine may need to be lifted off the mounts, one comes in from the top, the other from the bottom, and you will have...
I find it interesting that all of our cars seem to be able to take different sized max tires. I ran 245/60-15 no probs. Went up to 255/60 and...
Just to throw this out there... I ran 2-1/2" on a moderately built 5.0 +.040 for several years, with straight duals, and with an H. Most recent...
I know of a nice little beach house for sale in Surfside...That is NOT Baytown, but close to home...
I lucked out on my last set. They were REALLY stiff, so I cut them until they fit without having to compress them. Just jack the car up, and snap...
I have done glasspacks, flowmasters, straight pipes, and magnaflows. From now on Magnaflows on everything I own. Nice aggressive tone, no drone,...
My oil filler cap is my breather filter in the valve cover. I can check it to make sure it isnt saturated. Maybe clean it out.
Oh, my wife knows what my button is all about... [IMG]
Very easy to install. A button somewhere inside the car, a hot wire, and ground to the chassis. You will remove one brake line, and install two...
If you go to a parts dealer (if there are any), they will ask for the serial number and immediately the computer will pull up all the parts etc....
So...what year does that make it? Were you able to cross-reference that number to get the year and model out of it?
Can'f find any plates anywhere with the serial and model numbers?
Cool! I figured someone on here would know how to fix this!
Separate names with a comma.
