The housing is new. The problem is both ends of the uppper radiator hose are leaking!
Bryant is probably correct, ground. I actually run an extra ground wire to the tail light assembly and the lights are much brighter. Attach a...
Looks good, would be nice to have all of the info in those two "pods" instead of an extra tach, temp and oil gauge etc!
problem solved For future reference! The car is parked in a non-insulated garage. So, on hot days the temp in the garage is high creating a...
qkrthnu, with everything being new I'd look at the head gaskets or intake gasket. My problem is the top of the bell housing is dry!
Good point on the pics but wife has camera and wont be back until Weds! The crank pulley is from the 84 Mark as well but it lines up with the...
Mavman, I checked that back corner of both heads as that was my first thought. The back of the heads and intake appear to be dry! I agree the...
Need help with brackets. I have the serpentine crank pulley and serpentine crown vic water pump pulley installed. They line up with the correct...
Well, no carpet in the car and the passenger side floor board is dry! I'll keep looking. Just a strange place to find antifreeze.
OK, I have antifreeze dripping off of the bottom of the trans bell housing! The back of the heads and intake are dry (thinking head gasket or...
Mav71, mineral spirits is not alcohol based, short hydrocarbons. So, anti freeze evaporates 15x slower than mineral spirits (which evaporates...
I don't have a manual so hopefully someone can help out. Looking for the idler arm torque specs on a 74 mav!
antifreeze if quite hygroscopic so it will not let go of the water very readily!
OK, the click and clack puzzler of the day. Does antifreeze evaporate? I'm not talking about loss of anitfreeze in the cooling system. If you...
simpleman, very, well simple! would work without damage.
What is the best method for separating the ram from the center link and the pitman arm without causing damage? Thinking a pickle fork is not a...
Thanks for all of the feedback!
I've read the archives and would like to confirm a few things. For those that have switched from power to manual using the "adapter" while...
Olerodder, I also wasn't trying to ruffle feathers. I just wanted to be sure I understand the coolant route for future reference. Removing all...
InjectedMav, if my assumption is correct and both nipples are intakes then it makes sense that the water pump flows water into the block creating...
Separate names with a comma.
