Captainmack, heat always transfers from warm to cold. Pure physics! Especially when the material separating the fluids transfers heat well...
Hello All, just want to confirm a few things and ask a quick question or two. The forward line on the C4 is the pressure side and the rear is the...
I tried the local auto parts store! Never considered Wally World! Thanks for the responses.
I checked the archives but didn't find anything relating to where you can purchase replacement fuses! I have the original fuse box and a couple...
John, due to the offset gas tank in the mavericks I "plumbed" both exhaust pipes to exit on the passenger side. Exhaust on one side and fuel on...
update on fuel pump location I thought I would contribute to the board for a change and post some pics of the fuel pump mounting on my 74. It is...
Thanks for the replies. I've checked the one local yard but they are light on later model mustangs. I found several but none of the correct length.
I'm looking for a water pump bolt that is 3 inches long with a stud on the opposite end. Like the one in the pic. Don't tell me fastenal! Our...
placed mine in the same spot!
Aftermarket cone filter and tubing with "rubber" joints.
I know many of you have eliminated the charcoal canister in the engine bay. But, I'm wondering what most do with the vapor separator on top of...
Thanks Baddad, I'm switching back to carb just haven't figured out how to change the screen name! Are you running 140mph on the topend with the...
Mr gasket 12S Baddad, I have less motor than you (302, X303 heads, Ecam, shorties, air gap and 600cfm carb). I assume the 12S would be able to...
I've switched back to carb, haven't changed the name! Interesting idea to use a small pump such as the 12s. How is it for noise and durability?...
baddad, the Mr Gasket 12S is enough to run the 331?
Resto, I have a relay and inertia switch! Where were you planning to mount the inertia switch? Mine is located on the driver side trunk bracket....
Need some opinions on fuel pump location. I took the picture below looking up at the rear bumper. Obviously, we are talking about a large bumper...
I think it is leaking between the hose and thermostat housing. DDB, what style clamps do you use? And where do you buy them?
Actually, yes but shipping from CA probably isn't cost efficient. Is it an AOD or AODE?
Just removed all of the EFI stuff to simplify! I'd have to look up the codes but I'm sure without the EGR codes are likely. With the nuetral...
Separate names with a comma.
